Fiberglass pools are manufactured and installed as a big molded structure that is definitely placed on the ground. The fiberglass is made of tiny fibers of glass which have been strengthened having a polymer. It’s many shapes and styles to fit your lifestyle, and different textures and colors to select from to match your own style. Since it arrives in one pre-formed and pre-finished piece, the installation is faster than other different types of in-ground swimming pools something like concrete or gunite pools.
Easy to Clean
Fiberglass is resilient towards bacteria, mold, and algae. Even if algae growth does happen, it may be easily removed by just brushing. Being smooth in texture and non-porous, this pool doesn’t hold dirt as concrete pools do. Simple cleansers are enough to remove any stains and in many cases, the filters and pumps don’t have to figure very hard to hold the pool clean, thereby reducing electric bills.
Installation and Cost
Installation of fiberglass pools is quicker than gunite pools that range from a few weeks to a few months. Since the fiberglass pool is manufactured on the factory itself and also comes in one piece, just by putting it in the opening, the installation is much faster. Also, this type of in-ground pool sometime is installed in winter that is certainly impossible for gunite pools.
Fiberglass pools can withstand drastic changes in temperatures, unlike other pool types. Small cracks on the surface on the fiberglass will not affect the entire structure of your pool. Areas with winter season usually are not suitable for gunite or concrete pool, however, the fiberglass is fitted to regions with extreme temperatures.
Rough concrete pools need to be tiled, or else it might scrape the skin, red-tipped fingers and bleeding toes. Swimsuits and swimming trunks may experience damage caused by contact with the rough surface. Unlike concrete pools, the fiberglass includes a non-porous smooth surface which eliminates the scraping issue and ensures safe swimming.
Less Chemical Usage
Fiberglass pools require fewer chemicals when compared with other forms of in-ground swimming pools. Other pools release unwanted chemicals that affect the pH degree of the water and require chemicals to correct it. Since fiberglass does not affect the water that much, it only needs fewer amounts of chemicals to correct it and lesser requirement of water circulation which is also another cost for the electric bills.
Since a fiberglass pool doesn’t have any liners like vinyl-lined pools, the necessity for pool resurfacing, repainting and replastering shouldn’t be necessary. Also, this pool doesn’t crack easily and won’t require frequent professional services. Daily maintenance of the pool is also easier.
Problems in Location
Since fiberglass pools are preformed and are transported to your home on a sizable truck, the home has to be big that it might allow the big fiberglass pool in. Sometimes if the home is small, it may be difficult to transfer the fiberglass pool in and may cause some damage to the home which is another expense that you can make.
The water in this type of in-ground swimming pool must always remain at all times because it will cause structural damage, for example, cracking or buckling towards the fiberglass if not met. Improper drainage makes the formation of ground pressure, which causes the fiberglass to crack. Because of this, you will require an expert to drain the water. Always do not forget- a minimum amount of water is to be maintained at all times to balance the pressure inside and out of doors of the pool. Also, emptying the pool in the winter season cannot be carried out.
Since the pool is installed over a bed of sand, it has a tendency that the sand will move upwards as time passes by. When shifting of sand takes place, the pool needs to be set again.
Fiberglass pools are prefabricated with different shapes, colors, and sizes, and cannot be customized as per requirement. This means you only have limited options to pick for your fiberglass pool.